We have listed some common scenarios. It’s better to check some points before planning a repair with the technician. Few examples, like proper geyser settings, thermostat settings, safety valves, as well as home grounding, can solve simple problems. If the problem isn’t mentioned above, there’s most likely an issue with the heating element or thermostat. The heating element is completely in charge of heating the water and also the thermostat is in charge of knowing when to begin heating the water and when to stop. One of the most important thing isn’t to go to the local plumber to mend the geyser. Local plumbers may not be aware of every type of geysers and tend to hack into the issue and find ineffective temporary solutions. It’s best to always contact the authorized geyser repair service center. Many brands will send their technician to your home to fully fix the issue.

Geyser doesn’t turn on

There may be two reasons. First, verify that your electrical connection is correct. If you’re sure that the electrical connection to the geyser is correct, the issue is different. Most of the time there’ll be no indicator light. Many geyser models drain to avoid overheating problems. There’s a button that monitors overheating. When the temperature of the water reaches a really high temperature, it can drip. But newer models have adapted to the current scenario with the assistance of a thermostat. The real problem is that there’s no water and also the geyser has been on for a long time. The geyser heating element can burn and damage the complete geyser. There’s a drip safety button/switch in these scenarios. Havells Geysers has such a good supply. But this switch is inside the geyser, so you’ll have to call customer service or the plumber if it’s empty.

The geyser doesn’t work or there’s no hot water

In this scenario, Geyser is turned on. You are able to see the indicator light. It seems everything is correct. But the water is cold. there’s no hot water. What do I need to do? There may be several reasons…

The water heating element is completely damaged. It’s probably broken or too restricted. In a way, it’s corrupt.

The thermostat is actually a device that monitors the temperature of the geyser tank. If the water is too hot, it’ll turn off and if the water is below the threshold, it’ll turn on.

You can configure the thermostat. it’s basically noble in the geyser, where you’ll adjust the temperature of the water: cold, medium hot, very hot. The very 1st step is to check the thermostat level to see that it’s not set to the cool level. If the thermostat is marked hot, there’s real damage.

If the heating element or thermostat is broken, contact the manufacturer’s customer service department. The brand will send you a licensed plumber or repairer to resolve the matter. Contacting a local plumber isn’t recommended as they tend to hack or gamble to fix. The issue simply recurs if it’s not solved correctly and, in the worst case, the geyser can even be damaged.

Geyser gives the electric shock

First, check the ground connection. If the soil is poor, many devices will actually give you an electrical shock. Typically, a single device doesn’t produce a shock. In any case, it’s better to check it out. If your house is properly grounded and your electrical geyser still keeps on electrocuting you, it’s very dangerous. In fact, it can even cause an big electric shock. In case of a shock, you need to stop using the geyser immediately. Contact the suitable geyser repair service. This simply happens when the heating element is broken, it’s cracks inside. The cracks can actually cause electricity to flow into the water.

The geyser is losing water or the geyser keeps firing

Check the electrical valves on the geyser. Geysers tend to leak water, when the valves are loose. Tightening the valves should solve the issue. If not, it may actually be due to excessive pressure build-up. This is often a typical problem in high-rise apartments because the water comes from above with aggressive pressure. To overcome these common problems, many geysers today are equipped with safety valves. When there’s high pressure and also the geyser tank cannot keep up, it’s common for water to leak out. It’s normal for water leaks of 1 to 2 liters; you ought to take the geyser repair service for more than just the leak.

The geyser always overflows

In case of older models of geysers especially electric one, they tend to overflow when the thermostat settings allow for very high temperatures. Newer models sized the electrical geyser tanks for excessive overflow after boiling. Still, overflow can occur if valves are loose. So search for a geyser repair service.

The Latest: get it fixed or buy a brand new one

It is good to repair the issue when it’s a minor problem that may be easily fixed. If you wish to know more about geyser repair service contact Jagdamba Service or visit our website.